Chris' Corner: Shoddy chimney repair

Shoddy chimney repair

In this post, Reuben Saltzman, a home inspector from Maple Grove, MN discusses chimneys and more specifically shoddy chimney repair.  This is an often overlooked yet important issue as it can have serious safety ramifications...  If you want to comment on Reuben's blog, click on the link below:

I don't get hired to re-inspect chimney repairs often, but when I do, I'm often disgusted.  Here's how it works: the home inspector says the chimney needs repair, and the buyer tells the seller to fix the chimney.  The sellers usually hire the cheapest chimney repair contractor they can find... and it's usually an unqualified hack with a trowel.

Just as there is a big difference in the quality of work between home inspectors, there is a similar gap in the quality of work between good chimney contractors and hacks.  I'd like to share a couple of our recent encounters with these chimney hacks.

The $214 Chimney Re-Build

I inspected a home in Saint Louis Park that had a chimney with bricks that were disintegrating, and in need of major repair.

Disintegrating chimney bricks

Here's what I wrote in my inspection report:

The bricks at the chimney were literally falling apart. They were disintegrating and allowing water in to the chimney,which will hasten their deterioration. I suspect the bricks used at the chimney weren't the right type. Have the upper portion of the chimney re-built. This will be a major expense.

The buyer went back to the seller asking for the chimney to be repaired, and the seller hired someone to fix it... for $214.  That's a fraction of what I was guessing it would cost, so when the buyer learned what the seller paid for the repairs, he was rightfully suspicious and hired me to go back out.  The photo below shows what I found:

Hack chimney repair

I know what you're thinking - either "that's the same picture!" or "where's the duct tape?", right?  If you click on either of the photos for a larger view, you'll notice that in the second photo, someone simply slapped some mortar on the chimney; they didn't fix it.  This chimney still needs repair.

The Disintegrating Chimney Crown

I inspected a home in Minneapolis with a chimney that had recently been rebuilt.  The chimney walls looked great... but the crown was literally falling apart, due to a poor mix of concrete.

Disintegrating chimney crown 1Disintegrating chimney crown 2Disintegrating chimney crown 3Disintegrating chimney crown 4

Unfortunately, the entire crown will need to be redone.  Hopefully someone will go with a better mix of concrete, and a better design of crown as well.  To read about the differences in chimney crown designs, click here Tops to Last a Lifetime.

The Dry Stack

Neil inspected a home in Minneapolis where the clay tiles had been stacked together without any mortar between the joints.

Gap in fireplace flue

In order to be safe for use, the chimney liner must contain all products of combustion, which means every joint needs to be tightly mortared.  Neil told the buyer that this was an improperly constructed chimney that should be repaired.

The buyer hired a CSIA Certified Chimney Sweep to give an estimate on the repair; it was approximately $8,000.  The seller had someone else come out, who happened to be a mason and volunteer firefighter, who said the missing mortar wasn't a concern.  Pardon me?  A volunteer firefighter does not a forensic fire investigator make.  I'll trust the chimney expert, as well as the building code, which says "Clay flue liners shall be laid in medium-duty refractory mortar conforming to ASTM C 199 with tight mortar joints left smooth on the inside..."

Hopefully I've made my point. There are a lot of hacks with trowels that claim to be chimney experts.  There are three local companies that I've had firsthand experience with and recommend regularly: Jack Pixley Chimney Sweeps and MasonryLondon Chimney Sweeps, and 2nd Generation Chimneys.  The one thing that they all have in common is that they're all CSIA Certified Chimney Sweeps.  If you're looking for a high quality chimney contractor in your area, you would do well to start at www.CSIA.org.  They have a zip code search right on their home page.

Reuben Saltzman, Structure Tech Home Inspections - Email - Maple Grove Home Inspections

Facebook     LinkedIn    Follow Structure Tech on Twitter    ASHI Certified Home Inspector - Click To Verify     Click to subscibe to Reuben's Blog

Chris Smith CSSBB
          Sales Representative

Interested in Buying or Selling Real Estate?

  ph: 1.866.936.3500

Re/Max
Chay Realty Inc.,
Brokerage

Comment balloon 0 commentsChris Smith • August 02 2011 01:00PM

Comments

Participate